Toshiba e-STUDIO2500c Copier User Manual


 
1 BEFORE USING EQUIPMENT
40 Description of Each Component
Clearing functions selected
When you press the selected button, the function which has been selected is cleared. Or the
selected setting is cleared automatically by the automatic function clear* when the equipment
has been left inactive for a specified period of time.
* Automatic function clear:
This function works when a specified period of time has passed since the last paper exit or the
last entry of any button. This function returns all the function settings to default without the need
to press the [FUNCTION CLEAR] button. When the department or user management function is
being used, the display returns to the department code or user information input menu. When
these functions are not being used, the display returns to the basic menu of the copier function.
The period for the automatic function clear is set at 45 seconds by default at the time of installa-
tion of the equipment. See the User Functions Guide for change of this setting.
Adjusting the contrast of the touch panel
Turn this adjustment dial on the left side of the control panel to adjust the contrast of the touch
panel.