Filter
Top Products
3 Tests and Diagnostics 3.29 Sound/LAN/Modem Test Program
Subtest 02 Sin wave
When the subtest is executed, the following message appears.
....Press test number[1-4] ? pause
Press any key to continue...
When the beep sound finished, the screen returns to the main menu and the
following massage appears.
....Press test number [1-4] ?
To execute a subtest continuously, select the test number and press Enter. To
exit the Sound/Modem test, remove the test program disk from the USB FDD
and turn the computer off.
Subtest 03 LAN
This subtest checks the operation of mini-PCI I/F by the loopback in the chip.
When the subtest is executed, the following message appears. The large “OK”
is displayed if no error occurred.
ICH4+8256ET LAN TEST Rev.XX
Repeat count = 00000
Error count = 00000
LOOPBACK TEST
100Mbps Auto-negotiation TxRx Test
Destination Address = xxxxxxxxxxxx
Source Address = xxxxxxxxxxxx
** 100Base-TX Full-Duplex **
< TRANSMIT >
< RECEIVE >
3-78 [CONFIDENTIAL] QOSMIO F30 Maintenance Manual (960-555)