Filter
Top Products
4.17 Optical disk drive 4 Replacement Procedures
4.17.2 Ejecting the optical disk
CAUTION: The following procedure is emergency cope only when the optical disk inside
ODD (here, refers DVD super multi drive to DVD) can not be ejected
because of some failure.
Disassembling the ODD drive assembly
The following describes the procedure for ejecting the optical disk from the optical disk drive
(See Figure 4-29).
1. Remove the following screws securing the ODD cover.
• M1.8×2C S-THIN HEAD screw ×4
2. Open the ODD cover in the direction of the arrow to remove it from the ODD base
assembly.
3. Hold the optical disk and lift it out.
M1.8x2C S-THIN HEAD
M1.8x2C S-THIN HEAD
ODD cover
ODD base assembly
Optical disk
Hook
Figure 4-29 Ejecting the optical disk
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-47