Filter
Top Products
TMP92CZ26A
92CZ26A-330
7 6 5 4 3 2 1 0
Bit symbol − BR0ADDE BR0CK1 BR0CK0 BR0S3 BR0S2 BR0S1 BR0S0
Read/Write R/W
After Reset 0 0 0 0 0 0 0 0
Function
Always
write “0”
+(16−K)/16
division
0: Disable
1: Enable
00: φT0
01: φT2
10: φT8
11: φT32
7 6 5 4 3 2 1 0
bit Symbol BR0K3 BR0K2 BR0K1 BR0K0
Read/Write R/W
After reset 0 0 0 0
Function
Sets frequency divisor “K”
(divided by N + (16-K) / 16)
Sets baud rate generator frequency divisor
BR0CR<BR0ADDE> = 1 BR0CR<BR0ADDE> = 0
BR0CR
<BR0S3:0>
BR0ADD
<BR0K3:0>
0000(N = 16)
or
0001 (N = 1)
0010 (N = 2)
to
1111 (N = 15)
0001 (N = 1) (UART only)
to
1111(N = 15)
0000(N = 16)
0000 Disable Disable
0001(K = 1)
to
1111(K = 15)
Disable
Divided by
N + (16-K) /16
Divided by N
BR0CR
(1203H)
+(16−K)/16 division enable
00 Internal clock φT0
01 Internal clock φT2
10 Internal clock φT8
11 Internal clock φT32
Setting the input clock of baud rate generator
0 Disable
1 Enable
Divided frequency setting
BR0ADD
(1204H)
Note1:Availability of +(16-K)/16 division function
N UART mode I/O mode
2 to 15
1 , 16
The baud rate generator can be set “1” in UART mode and disable +(16-K)/16 division function.Don’t use in I/O
interface mode.
Note2:Set BR0CR <BR0ADDE> to 1 after setting K (K = 1 to 15) to BR0ADD<BR0K3:0> when +(16-K)/16 division function is
used. Writes to unused bits in the BR0ADD register do not affext operation, and undefined data is read from these
unused bits.
Figure 3.14.8 Baud rate generator control (channel 0, BR0CR, BR0ADD)