Filter
Top Products
4.7 Display Assembly 4 Replacement Procedures
M2 5x6 black flat head screw.
LCD FL cable
CCD cable
MIC cable
Wireless
LAN antenna
CN5
CN7
CN13
Figure 4-15 Removing the display assembly
Installing the Display Assembly
Install the display assembly according to the following procedures and Figures 4-14, 4-15.
1. Place the display panel in the correct position and push the wireless antenna cable,
CCD cable and MIC cable into the bottom cover.
2. Connect the LCD/FL cable to CN5 on the system board.
3. Connect the CCD cable to CN7 on the system board.
4. Connect the MIC cable to CN13 on the system board.
5. Secure the display assembly with four M2.5x6 black flat head screws.
6. Close the display panel and turn the computer so the back is facing you and secure
two M2.5x7 black flat head screws.
Satellite L300 / L305/Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual 4-31