Filter
Top Products
3.29 SETUP 3 Tests and Diagnostics
TECRA M1 Maintenance Manual (960-436) 3-87
Built-in HDD → Second HDD → PC Card (Default)
Second HDD → Built-in HDD → PC Card
Built-in HDD → PC Card → Second HDD
Second HDD → PC Card → Built-in HDD
PC Card → Built-in HDD → Second HDD
PC Card → Second HDD → Built-in HDD
6. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected. Otherwise it
selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and the external monitor for
simultaneous display.
NOTE: 1) When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after
starting in Resume mode, pressing Fn+F5.
2) Pressing Fn+F5 changes the display setting in the order of internal
LCD to simultaneous to external monitor.
(b) TV Type
This option lets you make settings for television display.
NTSC (Default)
PAL
7. Others
Whether or not you need to configure the computer with these options depends primarily on
the kind of software or peripherals you use.
(a) Power-up Mode
Use this option to choose between resume and boot mode. This option can also be
set by hotkeys.
Boot Turns on boot mode. (Default)
Resume Turns on resume mode.