Filter
Top Products
3.29 SETUP 3 Tests and Diagnostics
TECRA M1 Maintenance Manual (960-436) 3-89
Use this option to set a time and date for automatic power on and enable or disable
the ring indicator feature. Ring Indicator appears only when the computer is in
Resume mode. Alarm Date Option appears only when Alarm Time is enabled.
* only for Modem Model **only for LAN Model
Alarm Time is set in the sequence of hours and minutes. Seconds cannot be
changed. Alarm Date Option is set in the sequence of month and day. If Alarm
Date is set to Disabled, the computer will be powered on at the same time every
day. Press ↓ to move the cursor to the right and ↑ to move the cursor to the left
when you set the date and time.
NOTE: 1) Do not remove the AC adaptor and battery pack at the same time
when you use this feature. If you do so, data saved by the resume
function will be lost. You must also reset this option.
2) If you have set a password and the computer boots by the Auto Power
On function and Resume is on, the computer will start with the instant
security function enabled. The password = message is not displayed;
however, you must enter the password to use the computer.
(f) Panel Power On/Off
This option sets the Panel Power On/Off function. It is effective only when Power-
up Mode is set to Resume.
Enabled Enables the Panel Power On/Off.
Disabled Disables the Panel Power On/Off (Default)
8. Configuration
This option displays the configuration method.
The devices are initialized when the PNP OS loads.
Setup by OS First, devices necessary for loading the OS will be
initialized. After the PNP OS loads, other devices will be
initialized by the OS. In this case, setup of PC Cards will
be fixed to “Auto-Selected,” and cannot be changed.
(Default)
Alarm Time
= 00:00:00
Alarm Date Option = Disabled
Ring Indicator = Disabled*
Wake-up on LAN = Disabled**
OPTIONS