Filter
Top Products
4 Replacement Procedures 4.24 Wireless LAN Antenna/Bluetooth Antenna/Disp lay Cover/Speaker
4-74 TECRA M1 Maintenance Manual (960-436)
4.24 Wireless LAN Antenna/Bluetooth Antenna/Display
Cover/Speaker
Removing the Wireless LAN Antenna/Bluetooth Antenna/Display
Cover/Speaker
To remove the wireless LAN antenna/Bluetooth antenna/display cover/speaker, follow the steps
below and refer to figures 4-41 to 4-49.
NOTE: The left speaker cable and acetate tape securing the left speaker cable are
installed on the insulator depending on the type of the computer.
1. Turn the display assembly face down. Remove the acetate tape securing the right speaker
cable. Then remove the right speaker cable from the insulator. Remove the insulator from
the display assembly.
Insulator
Right speaker cable
Acetate tape
Right speaker cable
under the acetate tape
When the left speaker cable and acetate
tape are installed on the insulator,
remove the acetate tape and the left
speaker cable from the insulator.
boss
boss
Acetate tape
Left speaker cable
Insulator
Figure 4-41 Removing the Insulator