Toshiba M100 Surge Protector User Manual


 
4-14 Satellite M100
Operating Basics
3. Plug the other end of the cable into a LAN hub connector. Check with
your LAN administrator before connecting to a hub.
Disconnecting the LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with
your LAN administrator before disconnecting from the hub.
Wireless LAN
The wireless LAN is compatible with other LAN systems that comply with
the IEEE 802.11a/g wireless LAN standards.
It supports the following:
Automatic Transmit Rate Select mechanism in the transmit range of 54,
11, 5.5, 2 and 1 Mbit/s.
Advanced Encryption Standard (AES) data encryption, based on 128bit
encryption algorithm. (Revision G combo type.)
Frequency Channel Selection (2.4 GHz or 5 GHz)
Roaming over multiple channels
Card Power Management
Wired Equivalent Privacy (WEP) data encryption
Security
1. TOSHIBA strongly recommends that you enable the WEP encryption
function otherwise your computer could be left open to illicit access via
the wireless LAN connection which may result in an intrusion that can
lead to the theft or loss of stored data among other things. In addition,
the owner of an Internet connection is responsible for all browsing,
downloading, and uploading activities on that connection. Therefore, an
unsecured wireless network connected directly to the Internet is an open
invitation for outsiders to abuse your ISP account and privileges.
2. TOSHIBA is not liable for the eavesdropping on your data due to the use
of the wireless LAN connection and any damage that may occur thereof.
Bluetooth wireless technology
Bluetooth™ wireless technology eliminates the need for cables between
electronic devices such as desktop computers, printers and mobile phones.
Bluetooth wireless technology has the following features:
Wake-up on LAN does not function on a Wireless LAN.