Filter
Top Products
262
Using ConfigFree™ with your Toshiba Computer
ConfigFree Utilities
5.375 x 8.375 ver 2.3
2 Use the pointing device to select the Toshiba Wireless
Projector (DPJ), then click Settings. The Quick
Connect properties dialog box appears.
3 Complete the settings. Refer to the online Help if
necessary.
4 Click OK.
Because the wireless LAN’s default connection setting is for
Ad Hoc mode, the Toshiba Wireless Projector will not connect if
the projector is set to Infrastructure mode. If this occurs, you can
change the wireless LAN’s connection setting to Infrastructure
mode to match the settings on the projector.
(Sample Image) Projector icon when connected with Quick
Connect
If the wireless mode for the wireless setting is set for 5 GHz
(802.11a), Quick Connect changes this mode to 2.4 GHz
(802.11b) and then connects to the projector.
The wireless LAN configuration returns to the settings that
were last used before the Quick Connect function was started:
❖ If the Toshiba Wireless Projector utility is closed
NOTE