Filter
Top Products
4.8 Top Cover 4 Replacement Procedures
Latch
M2 5x3 black flat head screw.
Top cover
CN10
CN11
Figure 4-17 Removing the top cover
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-16, 4-17.
1. Seat the top cover, adjusting its position.
2. Secure the following 7 latches on the top cover, in that order:
- Four left latches
- Three right latches
3. Secure the top cover with one M2.5x3 black flat head screw.
4. Connect the touch pad board flat cables CN11 and Finger print flat cable CN10 on
the system board.
5. Turn the computer upside down and secure it with the following 11 screws:
Satellite MA200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual 4-33