Filter
Top Products
4. 10 USB and CRT Cable, and Bluetooth card 4 Replacement Procedures
Installing the USB and CRT Cable, Bluetooth Card
Install the USB and CRT Cable, Finger Print Board and Bluetooth Card according to the
following procedures and Figure 4-19.
Note: Be careful of the kill switch button for the USB board. It can be damaged when
installing the USB board. Make sure it is in the correct position.
1. Seat the Bluetooth card in the correct position and connect the Bluetooth card cable to
CN16 on the system board.
2. Secure the Bluetooth card with two M2x1 flat head screw.
3. Seat the USB cable and CRT in the correct position and connect the USB cables to
CN4, CN5 on the system board.
4. Secure two M2x2 black flat head screws securing the USB board.
Satellite MA200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual 4-37