Filter
Top Products
4.11 System Board, AC-IN cable and Fan 4 Replacement Procedures
Installing the System Board, AC-IN cable and Fan
Install the System Board, MIC cable, AC-IN cable according to the following procedures and
figure 4-20.
NOTE:
Be careful of the eject button for the PC card. It can be damaged when installing the
system board. Make sure it is pushed in.
1. Turn the system board upside down and connect the AC-IN cable to CN502.
2. Seat the AC-IN cable in the correct position.
3. Seat the system board in the correct position.
4. Secure the system board with one M2.5x1 black flat-head screw.
5. Seat the fan in the correct position and connect the fan cable to CN504 on the system
board.
6. Secure the fan with one M2x1 black flat-head screw.
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual 4-39