Filter
Top Products
4.14 Display Mask 4 Replacement Procedures
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-28.
1. Seat the display mask in the correct position and secure the following 15 latches, in
that order:
- Two top latches
- Four latches on each of the left and right sides
- Five bottom latches
2. Secure the display mask with the following 6 screws, in that order:
- Four M2.5x2 black flat head screws on the top
- Two M2.5x4 black flat head screws on bottom
3. Secure the following 6 seals to cover the screws, in that order:
- Four black seals on the bottom
- Two black seals on the top
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual 4-49