Filter
Top Products
80
Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
TECHNICAL NOTE: Your DVD-ROM or multi-function drive is
set to play region 1 (North America) DVD-ROMs. If you play a
DVD disc from another region, the drive will automatically
change to play in the format of the other region. The drive will
allow you to change regions four times. On the fourth change,
the region will be “locked in.” That is, the drive will only play
DVDs from that last region. Note that changing from region 1
to region 2 and back to region 1 is counted as two changes.
Sample DVD-ROM drive shown
Drive in-use indicator light—Indicates when the drive is in
use.
Eject button—Press to release the disc tray.
Do not press the eject button or turn off the computer while the
Drive in-use indicator light is glowing. Doing so could
damage the disc or the drive.
When the disc tray is open, be careful not to touch the lens or
the area around it. Doing so could cause the drive to
malfunction.
Manual eject hole—Use if you need to release the disc tray
when the power is off. Use a straightened paper clip or other
narrow object to press the manual eject button located inside
the hole.
Drive in-use indicator light
Eject button
Manual eject hole