Filter
Top Products
201
Toshiba Utilities
Fingerprint Authentication Utility
5.375 x 8.375 ver 2.3
5 Click the button above the finger you want to enroll.
6 Swipe your finger on the reader.
A sample will be created and indicated by a Fingerprint
icon.
7 Repeat the previous step. Swipe the same finger on the
reader two more times to create two more samples.
8 The final template will be created from these three
samples.
If you do not use a Windows password, you will be prompted
to define a new (non-empty) one. This is not necessary, but a
password improves the security of your software.
If your system supports power-on security, a Power-on button
is also displayed above each enrolled fingerprint. This button
is shown pressed by default, indicating that your fingerprint is
automatically added for power-on authentication.
During fingerprint enrollment, the system displays icons as
prompts, notifications, and warnings. These icons and their
meanings are as follows:
❖ Reader ready—the reader is waiting to read your
fingerprint. Swipe your finger when you are ready.
❖ Reader busy—wait for the reader to complete its
operation.
❖ Problem with operation—the reader could not read your
fingerprint. Swipe your finger again.
❖ Operation succeeded—the reader successfully read or
verified your fingerprint.
❖ Failed to verify the user—the fingerprint could not be
matched.
❖ Error reading fingerprint—the finger was too far to the
left or right. Center your finger and swipe it again.
NOTE