Filter
Top Products
4 Replacement Procedures 4.24 LCD unit/FL inverter
5. Remove the FL inverter while peeling off the double-sided tape.
FL inverter
FL cable
HV cable
Insulator
Figure 4-44 Removing the FL inverter
6. Carefully lift up the top of the LCD unit to access the LCD cable.
NOTE: When lifting up the top of the LCD unit, hold the corners of the LCD unit. The
top edge of LCD unit is sensitive area.
7. Remove the glass tape securing the LCD cable.
8. Disconnect the LCD cable and remove the LCD unit.
4-62 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)