Filter
Top Products
4 Replacement Procedures
Satellite M60 Series Maintenance Manual [CONFIDENTIAL] 4-51
Installing the LCD Module
To install the LCD module, follow the steps below and refer to the figures in the preceding section.
1. Set the LCD module in the display assembly.
2. Connect the FL cable and the HV cable to the FL inverter board.
3. Seat the LCD module in the display assembly with the LCD module bracket and six M2x3 black
screws. Secure the LCD module with four M2.5x6 black screws.
4. Secure one M2x3 black screws holding the left HV cable and FL inverter board in place.