Filter
Top Products
1.2 System Unit 1 Hardware Overview
Tecra A3/S2 Series Maintenance Manual 1-13
Marvell 88E8053 for Giga LAN
? PCI Express base specification 1.0a compliant
? x1 PCI Express interface with 2.5 GHz signaling
? Advanced error reporting
? Message signaled interrupts
? Configurable 48 KB deep buffer
? On-chip VLAN insertion and removal
? TCP, IP, UDP Checksum offload
? Compliant to 802.3x flow control support
? 10/100/1000 IEEE 802.3 compliant
? Automatic MDI/MDIX crossover at all speeds
? Wake On LAN(WOL) power management support
? Compliant to ACPI 2.0 specification
? Smart power down when link is not detected
? Marvell Virtual Cable Tester(VCT) for advanced cable diagnostics
Marvell 88E8036 for 10/100M LAN
? PCI Express base specification 1.0a compliant
? x1 PCI Express interface with 2.5GHz signaling
? Active state power management (L0s) support
? Advanced error reporting
? Configurable 4KB deep buffer
? Message signaled interrupts
? Compliant to 802.3x flow control support
? 10/100 IEEE 802.3 compliant
? Wake On LAN(WOL) power management support
? Compliant to ACPI 2.0 specification
? Smart power down when link is not detected
? Power regulator outputs for 2.5V and 1.2V supplies
Marvell 88SA8040 for Serial ATA Bridge
? ATA/ATAPI PIO mode data transfer
? ATA/ATAPI Ultra DMA(UDMA) data transfer rates of 16.7, 25, 33, 44, 66, 100,
133 and 150MB/s
? Serial ATA power save modes
? Serial ATA hot-plug
? Enhanced receiving FIFO flow control for Serial ATA link
? DMA Command Queuing(maximum 32 entries
? Supports 20, 25, 30, or 40MHz reference clock.
? Serial ATA Interface of 1.5Gbps
? Full scan for high production test coverage