Filter
Top Products
184
Toshiba Utilities
Toshiba Hardware Setup
5.375 x 8.375 ver 2.3
❖ Display—Allows you to change various default settings
for the built-in LCD display
When the computer restarts, it remembers the last
configuration. If data does not appear on the display you are
using after starting in Standby Mode, press Fn + F5.
❖ CPU—Allows you to enable or disable CPU frequency
switching modes.
Dynamically Switchable—This mode is the default setting
for your computer, and automatically changes the processing
frequency and decreases voltage depending on the power
source:
❖ AC Power—If your computer is connected to the AC
adaptor, the CPU frequency mode is set to high for faster
processing.
❖ Battery Power—If your computer is running on battery
power, the CPU frequency mode is set to low for slower
processing. Switching the CPU to low allows you to
conserve power and extend the operating time of your
battery.
Always High—Sets the CPU speed to high when using either
the battery or the AC adaptor.
Always Low—Sets the CPU speed to low when using either
the battery or the AC adaptor.
❖ Boot Priority—Allows you to change the sequence in
which your computer searches the drives for the
operating system
NOTE