4 Replacement Procedures 4.5 Modem
4-20 [CONFIDENTIAL] Satellite M70/Satellite Pro M70 Series Maintenance Manual
4.5 Modem
Removing the Modem
To remove the modem, you need to remove the HDD door first, described in the preceding section.
Follow the steps below:
1. Remove two black M2.5x3 screws securing the modem to the chassis.
Figure 4-7 Removing the Modem
2. Disconnect the RJ-11 wire, then remove the modem.
Installing the Modem
To install a modem, follow the steps below and refer to the figures in the preceding section.
1. Connect the modem cable to the modem module.
2. Fit the modem onto its connector and secure it with two black M2.5x3 screws.