Filter
Top Products
4.15 Speakers 4 Replacement Procedures
Satellite M70/Satellite Pro M70 Series Maintenance Manual [CONFIDENTIAL] 4-47
4.16 Speakers
Removing the Speakers
To remove the speakers, first remove the top cover, system board and then follow the steps below:
1. Remove two M2.5x3 screws from the right speaker.
2. Remove two M2.5x3 screws from the left speaker.
Figure 4-31 Removing the speakers
3. Lift out the speakers.
Installing the Speakers
To install the speakers, follow the steps below and refer to the figure in the preceding section:
1. Seat each speaker.
2. Secure the left speaker with two M2.5x3 screws.
3. Secure the right speaker with two M2.5x3 screws.