Filter
Top Products
4 Replacement Procedures 4.18 Thermal Module
4-50 [CONFIDENTIAL] Satellite M70/Satellite Pro M70 Series Maintenance Manual
4.18 Thermal Module
Removing the Thermal Module
To remove the thermal module, first remove the VGA board.
1. Remove four M2.5x3 screws from the thermal module.
2. Pry off the thermal module while being careful of the thermal grease.
Figure 4-34 Removing the Thermal Module
NOTE: After you remove the thermal module, be sure to replace the thermal grease on the
CPU when you reinstall it.
Installing the Thermal Module
To install the thermal module, follow the steps below and refer to the figures in the preceding section.
1. Restore the thermal grease to the top of the CPU.
2. Connect the thermal module, then secure it with four M2.5x3 screws.