Filter
Top Products
4 Replacement Procedures 4.20 Display Mask
4-54 [CONFIDENTIAL] Satellite M70/Satellite Pro M70 Series Maintenance Manual
4.20 Display Mask
Removing the Display Mask
To remove the display mask, first remove the display assembly as described earlier, then follow the
steps below:
1. Remove the mask seals to expose four lower inner corner screws securing the display mask.
2. Remove four M2.5x6 black screws from the corners that were previously covered by the mask
seals.
3. Carefully insert your fingers between the mask and the LCD panel and pry open the snaps.
Start with the four snaps at the top of the display mask. Continue unsnapping the display mask
along the two sides and the bottom edge to remove display.
Figure 4-40 Removing the display mask