Filter
Top Products
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
F
ehler! Formatvorla
g
e nic
h
6. Turn up the insulator and peel off the glass tapes.
7. Disconnect the LCD cable and digitizer cable from the connectors on the back of the
LCD unit.
CAUTION: When removing the cables, be careful not to damage the connectors.
8. Remove the LCD assembly from the display cover.
CAUTION: When putting the LCD assembly on the display cover, lay a mat or something
under the LCD assembly to protect the computer and the LCD from a
scratch or breakage.
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-87
Figure 4-53 Removing the LCD assembly (2)
Glass tape
Glass tape
LCD cable
Digitizer cable
LCD assembly
Insulator