Filter
Top Products
4 Replacement Procedures 4.12 Cover assembly and Base assembly
4. Turn the display 90 degrees counter clockwise.
5. Close the display and turn over the computer.
6. Remove the following screws.
• M2.5×16B FLAT HEAD screw ×3 (“16” in the figure below)
• M2.5×6B FLAT HEAD screw ×9 (“6” in the figure below)
16
16
16
6
6
6
6
6
6
6
6
6
Figure 4-19 Removing the cover assembly and base assembly (2)
4-32 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)