Filter
Top Products
4 Replacement Procedures 4.17 Microphone/Front panel
3. Remove the microphone cable from the guides of the front panel.
4. Remove the microphone hold plate and microphone from the front panel.
Microphone
Microphone cable
Microphone hold plate
Guide
Figure 4-26 Removing the microphone
Installing the Microphone/Front panel
The following describes the procedure for installing the microphone/front panel. (See Figure
4-25 and 4-26.)
1. Install the microphone to the front panel.
2. Install the microphone hold plate to the front panel.
3. Arrange the microphone cable along the guides of the front panel.
4. Install the front panel to the cover assembly in place while lifting up the system
board a little.
5. Connect the microphone cable to the connector CN6050 on the system board.
4-42 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)