Filter
Top Products
4.29 LCD unit/FL inverter 4 Replacement Procedures
7. Remove the following screws and two LCD supports from the LCD.
• M2×3S S-THIN HEAD screw ×4
M2×3S S-THIN HEAD
LCD
LCD support
M2×3S S-THIN HEAD
Figure 4-48 Removing the LCD support
NOTE: 1) Be careful not to apply pressure to the ICs along the edge of LCD unit. The
ICs are easily damaged.
2) For environmental reasons, do not throw away a malfunctioning LCD unit (or
FL). Please follow local ordinances or regulations for its disposal.
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-69