Filter
Top Products
- 14 -
EO1-11116
MA-516-100 SERIES
Numeric Display
AMOUNT (8 digits for total display, 7 digits for entries):
Displays the numeric data, such as amount, quantity, etc. When the obtained total or subtotal amount
is 8-digit, the RPT digit is also used for the amount display. When no entries are under way and the
Control Lock is in the REG position, the current time is displayed.
DPT (2 digits): Displays the code which represents each Department key.
It stays lit when repeating the same department entry.
RPT (1 digit): Displays the repeat count of the same item. The count is indicated from the second entry on, and only
the last digit will be displayed even if the count exceeds nine.
PLU (3 digits of the DPT and RPT are used for this purpose):
Displays the PLU code when any PLU is entered. It goes out when repeating the same PLU entry,
then only the RPT digit will be displayed for the repeat entry count.
Message Descriptors (Status Lamps)
SIGN ON: Illuminates when a cashier has signed ON when the Cashier Signing Method is selected. (It never
illuminates for the Cashier Push Key Method.)
ALM: Illuminates with the alarm buzzer to indicate that the last operation or numeric entry was an error.
To clear the error condition, depress the [C] key.
R OFF: Illuminates when the Receipt-OFF mode is declared by the [LOG/RECEIPT] key. In this condition,
no receipts will be issued for a sale to be entered. To extinguish this lamp (i.e., to change into Receipt-
ON mode for issuing receipts), simply depress the [LOG/RECEIPT] key again.
TL: Illuminates with the total amount displayed when a sale is finalized without any amount tendered.
ST: Illuminates with the subtotal amount displayed when the [ST] or [TXBL TL] key is depressed.
CG: When an amount tendering operation has been performed, this lamp illuminates with the amount of
change due displayed.