Filter
Top Products
MR-3018/3020/3021/3022 © 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS
3 - 6
3.2.3 Original width detection sensors-1 and -2 / Original length
detection sensor
The size of the original is determined by the detection performed in combination of the original width
detection sensors-1 and -2 and the original length detection sensor, as well as the detection performed
by the original tray width sensor.
Sizes detectable in combination of these sensors are as follows:
A4 series (ORG-SRS: 1)
A4 series (width sizes mixed at A3 / A4 standard)
A4 series (width sizes mixed at B4 / B5 standard)
A4 series (width sizes mixed at A4-R standard)
A4 series (width sizes mixed at B5-R standard)
Original length
detection sensor
Original width
sensor-1
Original width
sensor-2
Size determined Original tray width
OFF
OFF OFF A5-R -
ON OFF B5 -
ON ON A4 -
ON
OFF OFF B5-R -
ON OFF
A4-R / FOLIO
Determined by a gap
between guides
B4
ON ON A3 -
Original length
detection sensor
Original width
sensor-1
Original width
sensor-2
Size determined Original tray width
ON
ON ON A3
A3 / A4
OFF OFF A4-R / FOLIO
ON OFF B4
OFF
ON OFF B5
ON ON A4
Original length
detection sensor
Original width
sensor-1
Original width
sensor-2
Size determined Original tray width
ON
OFF OFF A4-R / FOLIO
B4/B5
ON OFF B4
OFF
ON OFF B5
OFF OFF A5-R
Original length
detection sensor
Original width
sensor-1
Original width
sensor-2
Size determined Original tray width
ON
OFF OFF B5-R
A4-RON OFF A4-R / FOLIO
OFF OFF OFF A5-R
Original length
detection sensor
Original width
sensor-1
Original width
sensor-2
Size determined Original tray width
ON OFF OFF B5-R
B5-R
OFF OFF OFF A5-R