Filter
Top Products
MR-3018/3020/3021/3022 © 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 4
[E] Original tray
(1) Take off the front cover.
( P. 4-1 "[A] Front cover")
(2) Take off the rear cover.
( P. 4-2 "[B] Rear cover")
(3) Take off the paper feeder unit.
( P. 4-6 "[A] Paper feeder unit")
(4) Remove 2 screws. Lift up the feeder upper
guide by sliding it to the right.
Note: Note:
Do not pull the harness too strong.
Fig. 4-10
(5) Disconnect 1 connector from the RADF con-
trol PC board.
Fig. 4-11
(6) Remove 1 screw and take off the bushing.
(7) Take off the original tray.
Fig. 4-12
Feeder upper guide
Original tray
Bushing
Screw
06/09