Filter
Top Products
© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved MR-3018/3020/3021/3022
DISASSEMBLY AND ASSEMBLY
4 - 15
4
(3) Take off the read motor drive section.
( P. 4-19 "[C] Read motor drive section")
(4) Remove 1 bushing, 1 E-ring and 1 pulley
from the rear side of the post-reading roller
shaft. Loosen 2 setscrews and take off 1
flange. Take off 1 bearing.
Fig. 4-41
(5) Remove 1 clip and 1 bushing from the front
side of the post-reading roller shaft.
Fig. 4-42
(6) Open the RADF. Remove 4 screws, take off
2 holders and platen guide.
Fig. 4-43
BearingFlange
Bushing
E-ring
Pulley
Bushing
Clip
Holder
Platen guide
Holder
06/06