Filter
Top Products
MR-3018/3020/3021/3022 © 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 20
(7) Remove 3 screws and then take off the
bracket.
Fig. 4-54
(8) Take off 1 timing belt and 4 bushings.
Fig. 4-55
(9) Loosen 1 screw of the belt tensioner.
(10) Remove the 2 E-rings, and then take off the
pulley and timing belt.
Note: Note:
When the unit is being assembled, first install
the parts removed at steps (5), (6), (7) and
(9), and attach the spring removed at step (4)
next. Then tighten the screw loosened at
step (8).
Fig. 4-56
Bracket
Timing belt
Bushing Bushing
Tensioner
Screw
E-ring
Timing belt
06/07