Filter
Top Products
MR-3018/3020/3021/3022 © 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 26
4.5 Sensor/switch
[A] Original tray width sensor (S2)
(1) Take off the original reverse tray.
( P. 4-5 "[F] Original reverse tray")
(2) Remove 2 screws. Release 8 latches and
separate the original tray into 2 parts.
Fig. 4-72
(3) Remove 1 screw and take off the cover.
(4) Disconnect 1 connector and take off the orig-
inal tray width sensor.
Fig. 4-73
Note: Note:
If washers (3 pcs) and a pinion come off,
assemble them in the order as shown in the
illustration.
Fig. 4-74
Original tray
width sensor
Connector
Cover
Washer
(
Black: t= 0.25
)
Washer
(
Gold
)
Washer
(
Black: t= 0.13
)
Pinion
06/09