Filter
Top Products
MR-3018/3020/3021/3022 © 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 30
[F] Original registration sensor (S5)
[G] Original width detection sensor-1 (S6)
[H] Original width detection sensor-2 (S7)
(1) Take off the feeder lower guide.
( P. 4-10 "[E] Feeder lower guide")
(2) Disconnect 1 connector. Release 2 latches
and take off the original registration sensor.
Fig. 4-84
(1) Take off the feeder lower guide.
( P. 4-10 "[E] Feeder lower guide")
(2) Take off the actuator.
(3) Disconnect 1 connector. Release 2 latches
and take off the original width detection sen-
sor-1.
Fig. 4-85
(1) Take off the feeder lower guide.
( P. 4-10 "[E] Feeder lower guide")
(2) Take off the actuator.
(3) Disconnect 1 connector. Release 2 latches
and take off the Original width detection sen-
sor-2.
Fig. 4-86
Original registration sensor
Actuator
Original width detection sensor-1
Actuator Original width detection sensor-2
05/12