Filter
Top Products
© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved MR-3018/3020/3021/3022
DISASSEMBLY AND ASSEMBLY
4 - 31
4
[I] Read sensor (S9)
[J] Original intermediate transport sensor (S8)
[K] Original exit/reverse sensor (S10)
(1) Take off the pre-reading upper guide.
( P. 4-13 "[H] Pre-reading guide")
(2) Release 2 latches and take off the read sen-
sor from the pre-reading upper guide.
Fig. 4-87
(1) Take off the pre-reading upper guide.
( P. 4-13 "[H] Pre-reading guide")
(2) Release 2 latches and take off the original
intermediate transport sensor from the pre-
reading upper guide.
Fig. 4-88
(1) Take off the pre-reading lower guide.
( P. 4-13 "[H] Pre-reading guide")
(2) Disconnect 1 connector.
Fig. 4-89
Read sensor
Original intermediate transport sensor
Connector
06/06