Filter
Top Products
User’s Manual 8-5
Optional Devices
1. memory module cover
Removing the memory module cover
4. Align the notch of the memory module with that of the memory module
slot and gently insert the module into the slot at about a 30 degree
angle before gently pressing until the latches on either side snap into
place.
1
Align the grooves along the edges of the memory module with the locking
tabs on the connector and insert the memory module into the connector
firmly - if you find it difficult to install the memory module, gently prise the
locking tabs outwards using the tip of your finger. Please also ensure that
you hold the memory module along its left and right hand edges - the
edges with the grooves in.