Filter
Top Products
4 Replacement Procedures 4.3 HDD
NB250/NB255 Maintenance Manual 4-10
4.3 HDD
Removing the HDD
CAUTION: Do not press on the top or bottom of the drive.
Applying such pressure can either corrupt the data in the drive
or damage the drive.
Remove the HDD (hard disk drive) according to the following procedures and Figure 4.2, 4.3
and 4.4.
1. To remove the HDD, remove two M2.5x4 HDD door TORX screws that secure the
HDD door and then remove the HDD door as shown in Figure 4.2.
Figure 4.2 Removing the HDD door
M2.5x4 TORX*2