Filter
Top Products
4 Replacement Procedures 4.5 WLAN Card
NB250/NB255 Maintenance Manual 4-30
4.10 Touch Pad
Removing the touch pad bracket
Remove the touch pad bracket according to the following procedures and Figure 4.19.
1. Remove two M2.5x2.5 screws from the touch pad bracket as shown in Figure 4.19.
Figure 4.19 Removing the screws from the touch pad bracket
2. Remove the touch pad bracket from the logic upper assembly.
Installing the Touch Pad Bracket
Install the touch pad bracket according to the following procedures.
1. Seat the touch pad bracket in the correct position,
2. Secure the bracket with two M2.5x2.5 screws.
M2.5x2.5*2