Filter
Top Products
4 Replacement Procedures 4.15 Camera module LVDS cable
NB250/NB255 Maintenance Manual 4-44
4.15 Camera module LVDS cable
Removing the Camera module and LVDS Cable
Remove the Camera module and LVDS cable according to the following procedures and
Figures 4.33 and 4.34.
1. Turn the LCD panel over and place it face down on a protective surface such as a foam
pad.
2. Disconnect the camera from the connector and remove it, as shown in Figure 4.33.
Figure 4.33 Removing the Camera from the LCD panel