Filter
Top Products
252 Troubleshooting Procedures
NB200 Series Maintenance Manual
25
2.6 Wireless LAN Troubleshooting
START
Perform diagnostic test
(Procedure 1)
Was a wireless LAN problem delected?
Perform connector and replacement check
(Procedure 2)
Replace wireless LAN antenna/unit
Replace system board
END
Yes
Wireless LAN system
is not faulty. Continue
troubleshooting - refer
to Figure 2.1
No
Figure 2-8 Wireless LAN troubleshooting process
The wireless LAN antenna wire, wireless LAN unit or system board may each be the source
of a wireless LAN fault. Any of these components may be damaged. To determine if the