Filter
Top Products
3. Tests and Diagnostics
3.15 3D G-sensor test
NOTE: please keep 90 degree between logic upper and LCD panel when test
The display of a test program and the set method of PC are shown below.
Display of a Test Program,The portion which PC and Test-Fixture contact is green.
Set method of PC <A>
Z
Upper
X
If the picture shows as below, it means the 3D G-sensor function is OK
Test 2 :
Set method of PC <B>
25
Test 3:
Set Method of PC <3>
Test 4:
Rear
U
pp
e
r
Right
U
pp
e
r