Filter
Top Products
User’s Manual 2-2
The Grand Tour
System indicators
The LED system indicators for specific computer operations glow when
those operations are in progress.
Figure 2-2 System indicators
Wireless
communication
The Wireless communication indicator glows
amber when the Wireless LAN function is turned
on. Only some models are equipped with
Wireless LAN function.
DC IN The DC IN indicator normally glows green when
power is being correctly supplied from the AC
power adaptor. However, If the output voltage
from the adaptor is abnormal, or if the computer's
power supply malfunctions, this indicator will go
out.
Power The Power indicator normally glows green when
the computer is turned on. However, if you turn
the computer off into Sleep Mode, this indicator
will flash amber - approximately two seconds on,
two seconds off - both while the system is
shutting down and while it remains in Sleep
Mode.
Battery The Battery indicator shows the condition of the
battery's charge - green indicates the battery is
fully charged, amber indicates the battery is
charging, and flashing amber indicates a low
battery condition. Please refer to Chapter 6,
Power and Power-up Modes for more information
on this feature.
HDD The HDD indicator glows green whenever the
computer is accessing the built-in hard disk drive.
Bridge media slot The Bridge media slot indicator glows green
when the computer is accessing the Bridge
media slot.