Toshiba NPS10A Projector User Manual


 
33
Operations
The default setting menu
This menu shows placement status and other settings. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select for the current input.)
Item
Description
Language Select one of the languages below to use for displaying the menu and
messages.
[
: Enter setting mode] [
:Selection] [Apply: ]
English/Français/
ㅔԧЁ᭛
/
ไทย
/Bahasa Indonesia
Mounting
Set projection mode in accordance with Placement Style.
p.19
(Standard) (Rear) (Ceiling) (Rear ceiling)
Menu Location Set the menu location on the display screen.
(Left top) (Right top) (Middle) (Left bottom) (Right bottom)
Projector ID ID definition can be set up by menu (range 1~99), and allow user control
an individual projector by RS232.
Signal RGB Y/Pb/Pb Video S-video HDMI
Fine Sync
Adjust with
to eliminate
flicker.
Yes No No No No
Total Dots
Adjust the number of total
dots in one horizontal period
with
Yes No No No No
H. Position
Adjust the horizontal position
of the image.
Move left
Move right
Yes No No No No
V. Position
Adjust the vertical position of
the image.
Move down
Move up
Yes No No No No
Mute Cut off the picture and sound temporarily.
On
Off
Volume Adjust sound volume.
Quieter
Louder
Advanced
Logo Set whether the start-up screen displays when power is turned on.
On
Off
Closed
Captioning
Select the closed captioning with
/
Off/CC1/CC2
Using the menus (Continued)