Filter
Top Products
39
Others
Trouble indicators
The indicator lights to inform you of internal abnormalities.
Power LED
Message
(Blue) (Red)
Off On
In standby state
When connecting the power cord, the projector will
be in standby state.
On Off
In normal state
When turning the power on (press ON/STANDBY
button), the projector will be in normal state.
Blink
(1 sec)
Off
Powering up
The projector is warming up and will show the start-
up logo
Blink
(0.5 sec)
Off
Power off
Cooling-I: It cannot accept any key at this status.
Blink
(1 sec)
Off
Power off
Cooling-II: It can accept ON/STANDBY button to
power on the projector.
Off
Blink
(0.5 sec)
Power went out during use
Problem with lamp.
Unplug the power cord, and contact your dealer.
Off
Blink
(1 sec)
Power went out during use
Problem with internal cooling fan.
Unplug the power cord, and contact your dealer.
After approx. 5 second of abnormal display, the
projector returns to the standby state waiting for
internal cool down.
Off
Blink
(0.5 sec on,
2 sec off)
Power went out during use
Internal overheating, or the outside temperature is
too high.
Place the projector so that the air intake and
exhaust are not blocked.
Unplug the power cord and wait for a short
while, then turn the power back on.
After approx. 5 second of abnormal display, the
projector returns to the standby state waiting for
internal cool down.