Filter
Top Products
55
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
8 Place the screw and the cover in a safe place so that you
can retrieve them later.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
Avoid touching the connector on the memory module or on the
computer. Grease or dust on the connector may cause memory
access problems.
9 Carefully remove the new memory module from its
antistatic packaging, without touching its connector.
10 Locate an empty memory module slot on the underside of
the computer.
If no memory slot is available, you must remove a module by
performing steps 2- of “Removing a memory module” on
page 58.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
NOTE
NOTE