Filter
Top Products
3.31 SETUP 3 Tests and Diagnostics
Satellite Pro S300, TECRA A10/S10/P10 Maintenance Manual (960-684) [CONFIDENTIAL] 3-93
9. Drives I/O
This option displays the address and interrupts level for hard disk drive and optical
disk drive. It is for information only and cannot be changed.
(a) Built-in HDD
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port0
(b) ODD
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port1
(c) eSATA
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port4
(d) SATA Controller Mode
This feature sets the SATA Controller Mode.
AHCI Sets AHCI which is the mode for VistaTM (default)
Compatibility Sets the mode for legacy OS. Use this mode when the
driver corresponding to AHCI is not used.
10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
11. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)