Filter
Top Products
4.28 Camera and Microphone 4 Replacement Procedures
3. Use a flat screwdriver to lever the microphone module from its socket and gently lift out.
Figure 4-88 Removing the microphone
Installing the Camera and Microphone
To install the camera and microphone, follow the steps below and refer to the figure in the
preceding section.
1. Fix the camera module to the adhesive backing at the top chassis.
2. Connect the CMOS cable (JP11) to the camera module.
3. Push the microphone into place in its respective bracket.
Satellite P200D/P205D Series Maintenance Manual
[CONFIDENTIAL]
4-71