Filter
Top Products
4 Replacement Procedures
Installing the HDD
To install the HDD, follow the steps below and refer to the figures in the preceding section.
1. Insert the HDD unit into the HDD slot.
2. Secure the HDD door with two black M2.5x5 screws.
Disassembling the HDD
To take apart the HDD, first remove it from the computer as described earlier.
1. Remove four M2.5x3 screws securing the HDD mounting brackets to the HDD. There are
two on each side.
Figure 4-6 Removing the HDD bracket
Satellite P30 Series Maintenance Manual 4-11