Filter
Top Products
4 Replacement Procedures
4.7 Wireless LAN Unit
Removing the Wireless LAN Unit
1. Turn the computer upside down and loosen the three embedded M2.5x6 screws securing the
wireless LAN compartment cover.
Figure 4-9 Removing the mini PCI bracket
2. Lift off the wireless LAN compartment cover.
3. Remove the embedded screw M2.5x6 securing the Mini PCI bracket.
Note: If your wireless LAN unit is an ‘A’ type card, then the screw will be a safety screw.
4. Detach the two ends of the wireless LAN antenna.
4-14 Satellite P30 Series Maintenance Manual